Polycom VSX 3000

Administrator’s Guide for the VSX Series
2 - 6
3. Select to view the IP addresses for the current gatekeeper, the
primary gatekeeper, and any alternate gatekeepers.
Configuring Integration with Avaya Networks
VSX systems with an Avaya option key can use the following features on an
Avaya telephony network:
• Call forwarding (all, busy, no answer)—Configured by the Avaya
COMMUNICATIONS MANAGER (ACM) administrator and
implemented by the user
• Call coverage—Configured by the ACM administrator
• Transfer—Implemented via flash hook and dialing digits
• Audio conference—Implemented via flash hook and dialing digits
• Call park
• Answer back
• DTMF tones for Avaya functions
Use
PathNavigator for
Multipoint Calls
VSX 3000
VSX 3000A
VSX 5000
VSX 7000
VSX 7000s
VSX 7000e
VSX 8000
Lets you specify whether multipoint calls use the system’s
internal multipoint capability or the Conference on Demand
feature available with Polycom PathNavigator™,
ReadiManager SE200, or Polycom CMA system. This
feature is available only if the system is registered with one of
these gatekeepers.
Setting Description
Points to note about PathNavigator’s Conference on Demand feature:
If your organization uses Polycom’s PathNavigator, you can use PathNavigator’s
Conference on Demand feature to place multipoint calls.
In order to place calls using PathNavigator, you need to:
• Register your VSX system with PathNavigator.
• Configure your VSX system to use PathNavigator for multipoint calls (see
Configuring the System to Use a Gatekeeper on page 2-4).
• Create a multi-site entry in the directory (recommended).
When using PathNavigator’s Conference on Demand:
• Once the call begins, users cannot add another site to the call, even if the site
was in the call originally.