Polysoude PS 254 - Page 40

MAN. PS 254 EN – Ind. 2 39
Welding heads TS-TP for tube to tubesheet
welding
Reference number R30 :
• Axxx * Welding heads without switch to
detect the home position.
• Hxxx * Welding heads with switch to
return to the home position after the end of
the weld cycle, using the shortest way.
• Jxxx * Welding heads return to the home
position after the end of the weld cycle, in
the opposite direction of the welding.
Weld head
type
Minimum
diameter
(mm)
Maximum
diameter
(mm)
Reference
number
(R30)
Number of
impulses per
revolution
Factor C
(VP=C*VL/D)
TS 25 6 25
A014
(H014, J014)
359 24
TS 73 8,5 60
A044
(H044, J014)
364 77
TS – TP 60 8,5 60
A044
(H044, J014)
364 77
TS 2000 10 60
A032
(H032, J032)
357 55
SCK 20 20 C021 365 37