© 2006 Schneider Electric All Rights Reserved
63230-500-224A1 PowerLogic
®
Series 800 Power Meter
6/2006 Chapter 1—Introduction
EN–9
ENGLISH
Firmware
This instruction bulletin is written to be used with firmware version
10.5. See “Identifying the Firmware Version” on page EN–56 for
instructions on how to determine the firmware version. To download
the latest firmware version, follow the steps below:
1. Using a web browser, go to http://www.powerlogic.com.
2. Select United States.
3. Click downloads.
4. Enter your login information, then click LogIn.
5. Click PM8 Firmware under the POWERLOGIC section.
6. Follow the instructions on the web page that explains how to
download and install the new firmware.