© 2006 Schneider Electric All Rights Reserved
PowerLogic
®
Series 800 Power Meter 63230-500-224A1
Chapter 6—Operation 6/2006
EN–48
ENGLISH
below 1;. To cycle through the menu items in a menu list, press the
button below ###: (see Figure 6 – 1).
NOTE: Each time you read “press” in this manual, press and release
the appropriate button beneath the menu item. For example, if you
are asked to “Press PHASE,” you would press and release the button
below the PHASE menu item.
Changing Values
When a value is selected, it flashes to indicate that it can be modified.
A value is changed by doing the following:
• Press + or – to change numbers or scroll through available
options.
• If you are entering more than one number, press <- to move to
the next number in the sequence.
• To save your changes and move to the next field, press OK.
Menu Overview
The figure below shows the menu items of the first two levels of the
power meter. Level 1 contains all of the menu items available on the
first screen of the power meter. Selecting a Level 1 menu item takes
you to the next screen level containing the Level 2 menu items.
NOTE: The ###: is used to scroll through all menu items on a level.
To Next Page
Loading...
Need help?
General
