Cube
11
Revision 10 EN - 03/2021
Further symbols that are not safety-related:
Here you can find useful information and helpful hints.
With the CE marking the manufacturer guarantees that his product is in confor-
mity with the EC guidelines.
Call for observing (visual feedback from the device or the software).
X
Call for action
3 About this operating manual
This documentation describes the installation and operation of the Cube and performing
measurements with the Cube, the Cube App or the optional LaserDiagnosticsSoftware
LDS.
With the Cube App for mobile devices with Android™ you can operate and evaluate the
device via a smartphone/tablet. The Cube App is available for free in Google Play-Store/
Apps.
For measurement operation with a PC, the LaserDiagnosticsSoftware LDS (option)
must be installed on the PC. For a detailed description of the software installation, file
management and evaluation of the measured data, please refer to the separate operat-
ing manual LaserDiagnosticsSoftware LDS.
4 Conditions at the installation site
• The device must not be operated in a condensing atmosphere.
• The ambient air must be free of organic gases.
• Protect the device from splashes of water and dust.
• Operate the device in closed rooms only.
In industrial environments erroneous measurements may be triggered by strong elec-
tromagnetic fields. In this case we recommend EMC compliant shielding of the safety
interlock cable.
To Next Page
Loading...
Need help?
General
