Cube
46
Revision 10 EN - 03/2021
16.1.1 Safety instructions
DANGER
Severe eye or skin injury due to laser radiation
If the protective window is not correctly positioned, reflections can cause
directional laser radiation.
X
Ensure that the new protective window is positioned evenly in the inden-
tation on the O-ring.
CAUTION
Burns due to hot components
After a measurement the absorber below the protective window is hot!
Unintentional contact during the protective window exchange could lead
to burns.
X
Do not replace the protective window directly after a measurement.
X
Let the device cool down for an adequate period of time. The cooling
time varies depending on the laser power and the irradiation time.
NOTICE
Damaging/Destruction of the device
Contamination and fingerprints on the protective window can lead to
damage or shattering or splintering of the protective window during mea-
suring operation.
X
Only replace the protective window in a dust-free environment.
X
Do not touch the protective window.
X
When exchanging the protective window wear powder-free latex gloves.
To Next Page
Loading...
Need help?
General
