Cube
24
Revision 10 EN - 03/2021
12 Important information for measuring with the Cube
12.1 Safety instructions
DANGER
Serious eye or skin injury due to laser radiation
If the stability of the device is not ensured or the inlet aperture is not cen-
tered and mounted perpendicular to the laser beam, increased scattered
or directed reflection of the laser beam will occur.
X
Install the device according to chapter 8.4 on page17 in a way that
ensures, that the device can not shift or fall.
DANGER
Severe eye or skin injury due to laser radiation
During the measurement the laser beam is guided on the device, which
causes scattered or directed reflection of the laser beam (laser class 4).
The reflected beam is usually not visible.
X
Please wear safety goggles adapted to the power, power density, laser
wave length and operating mode of the laser beam source in use.
X
Wear suitable protective clothing and protective gloves.
X
Protect yourself from laser radiation by separating protective devices
(e.g. by using appropriate shielding).
NOTICE
Damaging/Destruction of the device
The maximum permissible energy per laser pulse depends on various
variables, including the absorber temperature.
X
Please observe the limit values and dependencies specified in chap-
ter19, „Technical data“, on page50 and chapter21, „Appendix“, on
page53 before the measurement.
To Next Page
Loading...
Need help?
General
