Cube
5
Revision 10 EN - 03/2021
10 Functions of the On/Off button 21
11 Displays on the device 22
11.1 Status messages ................................................................................. 22
11.2 Warning message ................................................................................ 23
11.3 Charge status of the lithium-ion battery ................................................ 23
12 Important information for measuring with the Cube 24
12.1 Safety instructions................................................................................ 24
12.2 Laser parameter setting ....................................................................... 26
12.2.1 Setting the laser rise time ....................................................... 26
12.2.2 Maximum permissible power density ...................................... 27
12.2.3 Minimum and maximum energy input per measurement ......... 28
12.3 Waiting times until the next measurement in a measurement series ...... 29
12.4 Measurement with pulsed lasers .......................................................... 30
13 Measuring with the Cube 31
13.1 Start measurement .............................................................................. 31
13.2 Measuring results display ..................................................................... 33
14 Measuring with the optional LaserDiagnosticsSoftware LDS 34
14.1 Notes of the LaserDiagnosticsSoftware LDS during measurement ....... 34
14.2 Connect the Cube to the LaserDiagnosticsSoftware LDS ..................... 35
14.3 Open toolbench Cube measurement ................................................... 36
14.4 Settings for trigger level, power saving functions and automatic
measurement readiness ....................................................................... 37
14.5 Start measurement .............................................................................. 39
14.6 Measuring results display ..................................................................... 40
14.6.1 Display the current measurement in the toolbench Cube
measurement ......................................................................... 40
14.6.2 Display of the measurements stored in the Cube .................... 41
14.7 Delete measured values from the memory of the Cube ........................ 43
To Next Page
Loading...
Need help?
General
