Printronix P9212 - Tools, Test Equipment, and Supplies

1–14
Overview
Tools, Test Equipment, and Supplies
The tools, test equipment, and supplies required for field level maintenance
of P9212 printers are listed below.
Item Part Number Recommended Item
Adapter, Torque Screwdriver — Utica HW–18
Adjustable W rench — Utica 91–4C
Anhydrous Alcohol — —
Diagonal Cutters — Erem 91EH
Digital Voltmeter — —
Driver, Torque Screwdriver — Utica TS35
Extension, 3 in., 3/8 Drive — —
Extension, 6 in., Torque Screwdriver — —
Feeler Gauge Set — Proto 000AA
Force Gauge — —
Hammer Tip Alignment Tool 132266–001 —
Hex Bit, 3/16 in., Torque Screwdriver — Utica W–8
Hex Bit, 3/32 in., Torque Screwdriver — Utica HW–4
Hex Bit, 5/32 in., Torque Screwdriver — Utica HW–6
Hex Bit, 5/64 in., Torque Screwdriver — —
Hex Key Set, 15 PC — McMaster–Carr Supply ,
Cat. No. 7125A1 1
IC Insertion/Extraction Tool — —
Kimwipes — —
Lubricant 101805–001 —
Nut Driver Set — Xcelite P2120
Oscilloscope and Probes ( ≥ 35 MHz)
— —
Pliers, Grip Ring — Truarc 1120
Pliers, Chain Nose — Erem 11DH
Ratchet, 3/8 in. Drive — —
Rule, Steel, 6 in. — General 616
Scale, Spring, 0 to 40 lbs. — —
Screwdriver , Allen Hex — Xcelite 99PS40
Screwdriver, Phillips — Xcelite X100
Screwdriver, Phillips — Xcelite X102
Screwdriver, Slot — Xcelite A184