Chapter 7: Monitor Profiles
37
To save a monitor profile:
1 Choose File > Save Profile.
If you are saving edits to an existing profile, your changes are saved to that file and you can ignore the following steps. If you saving a
newly created profile, continue with the following steps.
2 In the resulting Save As dialog, type a name for the monitor profile.
3 Navigate to where you want to save the profile (.dmprof).
4 Click Save.
To save a monitor profile as a new file:
1 Choose File > Save Profile As.
2 In the resulting Save As dialog, type a name for the monitor profile.
3 Navigate to where you want to save the profile (.dmprof).
4 Click Save.
To close the current monitor profile:
Choose File > Close Profile.
DADman saves the profile and closes it.
Importing Monitor Profiles from Other MTRX and MTRX II Units
You can import a Monitor Profile (.dmprof) created by other MTRX or MTRX II units.
To import a Monitor Profile:
1 Choose File > Import Profile.
2 Navigate to and select the .dmprof file you want to import.
3 From the Select Unit menu, select the MTRX device you want to use for monitoring.
4 Select Enable monitor, then the Mon row in DADman will be populated with the new monitor profile.
To Next Page
Loading...