Probox PBR-500 - Windows 2000, XP

15
1) After connecting PBR-500 and plug power
cable, Windows itself will install driver
automatically.
And then, check the driver installation at
Windows [Start > Settings > Control panel >
(switch to classic View on Windows XP) >
system > Hardware > Device manager >
Universal Serial Bus controllers > USB Mass
Storage Device].
2) You can now find a new volume at ‘My
Computer’ or ‘Explorer’ and you can copy &
paste the files.
3) After file transfer, remove PBR-500 by using
remove icon at Windows right-down corner.
If you don’t follow this procedure, the transferred
files and PBR-500 may be damaged.
1.3.3 Windows 2000, XP
If you can not find a new volume, then do
HDD format again.
Windows 2000, XP detects both FAT32
and NTFS file system.
When you see ‘Non High-Speed USB Hub
Message’
The message will be displayed On windows
XP when you plug PBR-500 into USB 1.1
spec. Host adapter.