EasyManua.ls Logo

Probox PBR-500 - Introduction; Usage Precautions

Probox PBR-500
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
Introduction
Usage Precautions
Please read the followings carefully and refer to [Cautions] in the manual for the proper use.
Copyright
* Probits Co. Ltd has no responsibilities for the recorded programs or files made or distributed for the purpose of
illegal commercial or transactional activities. The party or parties who record or distribute the contents bear all
the responsibilities (Civil or Criminal) direct or indirect..
Supported codec
* The Probox PBR-500 may not play some media files. Please check the codec types. Also it may not play or
run improperly depending on file characters or circumstance.
USB Device
* Connect the power adapter as well when you connect the Probox PBR-500 to a PC.
Probox PBR-500 may not be connected if the USB cable is more than 3 meters (9.8 feet).
Recommended length is 3 meters (9.8 feet) (recommend you to use the supplied USB cable.)
If the USB cable is too long, the transfer speed and the connection may not be good.
If you connect this device to USB 1.1 Host Adapter, the speed is USB 1.1 (Max. 12Mbps), so we recommend
you to connect to USB2.0 for full speed of max. 480Mbps.
USB Host
* The USB Host may not be matched with all USB storages. Please check the compatibility before you
purchase or use the USB storage.
HDD Type * Only 3.5” SATA type HDD can be used.
Radio Waves Cross
* The Probox PBR-500 may have the possibility of radio waves cross, so recommend not to use the service
related to human safety.
Data Backup
* We strongly recommend you to back up the data to another safe media. We are not responsible for data
damage or loss in built-in HDD.
Drop, shock * Do not drop the device. It may cause critical damage to the hard drive
Strange Materials * Don’t insert steel materials (coin, etc) or other materials that may cause the Probox PBR-500 defect..
Disassemble / Remodel * Don’t try to disassemble or remodel the Probox PBR-500. It may cause malfunction
Stack Up * Don’t stack another heavy material on the Probox PBR-500.
Exposure to water,
moisture, etc
* Don’t expose the Probox PBR-500 to oil, water, dust, moisture or rain and wind.
If the Probox PBR-500 is wet then unplug the power cable from the unit right away.
Heat * Keep the Probox PBR-500 away from heated areas. Set it up in well-ventilated places.
Magnetic Materials
* Keep all magnetic materials away from the Probox PBR-500. Magnetic materials such as speakers or
magnets may erase or cause damage to the data stored in the hard disk.
* Probits Co. Ltd has no warranty of responsibility for the broken HDD.