Probox PBR-500 - How to Upgrade Firmware

To Previous Page

11. Firmware Upgrade

Download an upgrade file from local distributor in your country or visit at www.goprobox.com

While upgrading the firmware, DO NOT turn off the PBR-500.

How to upgrade the new firmware?

Currently, you can upgrade the new firmware through the HDD inside or an external USB storage.

[Step 1] : Connect the PBR-500 and TV and turn on the both devices.

[Step 2] Save the new firmware at the Root Directory

of the HDD inside or the external USB storage.

[Step 3] : While you are pressing [Stop] button at the front panel of the PBR-500, unplug & plug the power cable.

[Step 4] : Take away your finders from the [Stop] button.

[Step 5] : Now, the PBR-500 is running the firmware upgrading. It takes more than 1 minute.

So, please be patient while upgrading.