31
6) Check ‘User cannot change password’ and
‘Password never expires’.
7) Move to [Control Panel>Network and Dial-up
Connections], and select Properties of ‘Local
Area Connections’ by right click of mouse.
8) Double click ‘Internet Protocol (TCP/IP)’ that
you want to use on your computer.
9) Check ‘Use the following IP address’, and
write ‘IP address’ & ‘Subnet mask’ that you want
to use.
For example,
IP address: 192.168.1.3
Subnet mask: 255.255.255.0
If you see two or more ‘Local area connections’,
select one that you will use for connecting to PBR-
500.
If you select ‘Obtained an IP address
automatically’, you don’t need to write a specific
IP address.
To Next Page
Loading...