Prodigy Autocode User Manual

Owner’s Manual
AutoCode
®
Blood Glucose Meter
10
Test results below 60 mg/dL (3.3 mmol/L) indicate low
blood glucose (hypoglycemia).
Test results greater than 240 mg/dL (13.3 mmol/L) indi
-
cate high blood glucose (hyperglycemia).
If your test result is below 60 mg/dL or above 240 mg/
dL, repeat the test, and if the result is still below 60 mg/
dL (3.3 mmol/L) or above 240 mg/dL (13.3 mmol/L),
consult with your healthcare professional immediately.
Inaccurate results may occur in severely hypoten
-
sive individuals, individuals in shock, and in those
experiencing a hyperglycemic-hyperosmolar state.
Please refer to the test strip package insert for
additional important information.
Severe dehydration and excessive water loss may
cause false low results. If you believe you are suffering
from severe dehydration, consult with a healthcare pro-
fessional immediately.
If you are experiencing symptoms that are not
consistent with your blood glucose test results and
you have followed all instructions described in this own-
er’s manual, contact your healthcare professional.
Important Health-Related Information

Prodigy Autocode Specifications

General

Measurement Range	20-600 mg/dL
Sample Size	0.6 µL
Test Time	6 seconds
Coding	No Coding Required
Battery Type	2 x AAA batteries
Automatic Shutoff	2 minutes
Data Port	USB
Operating Conditions	50-104°F (10-40°C)
Memory Capacity	Up to 450 test results