Prodigy Autocode User Manual

Owner’s Manual
AutoCode
®
Blood Glucose Meter AutoCode
®
Blood Glucose Meter
Low Battery
The meter will alert you when the power is getting low
by displaying two (2) different messages:
1. When the “ ” symbol appears alone on the display,
the meter is functional and the results remain accurate,
but you should change the batteries as soon as
possible.
2. When the “ ” symbol appears together with the
“E-b” symbol on the display, the battery does not have
enough power for a test. You must change the battery
before using the meter.
53
Battery
Your Prodigy AutoCode
®
meter comes with two (2)
1.5V AAA alkaline batteries. Batteries are manufactured
in a charged state and not designed for recharging.
Recharging the batteries can cause battery leakage,
or in some cases, high pressure rupture. Replace both
batteries at the same time.
Warning: Batteries can explode or leak
and cause burns if installed backwards,
disassembled, charged or exposed to water,
re or high temperatures.

Prodigy Autocode Specifications

General

Measurement Range	20-600 mg/dL
Sample Size	0.6 µL
Test Time	6 seconds
Coding	No Coding Required
Battery Type	2 x AAA batteries
Automatic Shutoff	2 minutes
Data Port	USB
Operating Conditions	50-104°F (10-40°C)
Memory Capacity	Up to 450 test results