Prodigy Autocode - Important Test Strip Information

Owner’s Manual
AutoCode
®
Blood Glucose Meter AutoCode
®
Blood Glucose Meter
15
1. Absorbent Channel: Apply a drop of blood here.
2. Conrmation Window: To conrm if enough blood
is applied or has been drawn into the strip.
3. Test Strip Handle: Hold this part to insert the test strip
into the test strip slot.
4. Contact Bar: Insert this end into the test strip slot.
1
2 4
Please refer to the “Performing a Blood Glucose Test”
section for complete instructions.
Important Test Strip Information
• Store test strip packages in a cool, dry place
between 39.2°F–104°F (4°C–40°C) and 10-85% rel-
ative humidity.
• Do not freeze.
• Keep away from direct sunlight and heat.
(Do not store in your car.)
• Store your test strips in their original vial only. Do not
transfer them to a new vial or any other container.
P R O D I G Y
®
3