Prodigy Autocode User Manual

Owner’s Manual
AutoCode
®
Blood Glucose Meter
28
Prodigy Control Solution should come with an insert.
• For in vitro diagnostic (external) use only.
• Please review all instructions before using.
INTENDED USE:
Prodigy Control Solution is used to check the test-
ing technique and system performance. The Prodigy
AutoCode
®
Blood Glucose Monitoring System can
use both Prodigy Control Solution Low (Level 1) and
High (Level 2).
SUMMARY:
Prodigy Control Solution is a red liquid that contains
glucose. The control solution reacts with the test strips
to produce a test result. When the control solution test
result falls within the control range given for the lot of
test strips being used, this is indication that the system
is working as it should and your testing technique is
good. The control range can be found on the test strip
vial label.
Control Solution Testing

Prodigy Autocode Specifications

General

Measurement Range	20-600 mg/dL
Sample Size	0.6 µL
Test Time	6 seconds
Coding	No Coding Required
Battery Type	2 x AAA batteries
Automatic Shutoff	2 minutes
Data Port	USB
Operating Conditions	50-104°F (10-40°C)
Memory Capacity	Up to 450 test results