Prodigy Autocode User Manual

Owner’s Manual
AutoCode
®
Blood Glucose Meter AutoCode
®
Blood Glucose Meter
35
Warning:
1. Lancets are for single use only.
2. Keep lancing device and lancets clean.
3. Use caution when removing the used lancet from the
device and when disposing of it.
4. The meter and lancing device are for single patient
use. Do NOT share them with anyone including other
family members. Do NOT use on multiple patients.
Performing a Blood Glucose Test
Preparing the Lancing Device
STEP 1: Twist off the Lancing
Device Cover. See Figure 22.
STEP 2: Insert a sterile lancet into
the Lancet Carrier. See Figure 23.
STEP 3: Hold the Lancet Needle
Cover and gently twist it off the
Lancet. See Figure 24.
Figure 23
Figure 24
Figure 22

Prodigy Autocode Specifications

General

Measurement Range	20-600 mg/dL
Sample Size	0.6 µL
Test Time	6 seconds
Coding	No Coding Required
Battery Type	2 x AAA batteries
Automatic Shutoff	2 minutes
Data Port	USB
Operating Conditions	50-104°F (10-40°C)
Memory Capacity	Up to 450 test results