Prodigy Autocode User Manual

Owner’s Manual
AutoCode
®
Blood Glucose Meter AutoCode
®
Blood Glucose Meter
45
The Prodigy AutoCode
®
meter stores a maximum
of 450 of the most recent blood glucose test results
with the date and time. It also provides 7, 14 and 28–day
blood glucose test averages. You can review the indi-
vidual or average test results by entering the memory
mode.
Using the Meter Memory
STEP 1: Enter the Memory Mode
While the meter is turned off, press and hold the “M”
button to turn the meter on. Press the “M” button again
to enter memory mode. The 7–day average will appear,
indicating that you are in the memory mode.
If you continue to press the “M” button, the 14 and
28–day averages will appear in order. You can then re-
view the last 450 individual test results in the memory.
When using the meter for the rst time
or when the memory has been deleted,
“- - -” appears, indicating there are no
test results in the meter memory.
See Figure 35.
Figure 35

Prodigy Autocode Specifications

General

Measurement Range	20-600 mg/dL
Sample Size	0.6 µL
Test Time	6 seconds
Coding	No Coding Required
Battery Type	2 x AAA batteries
Automatic Shutoff	2 minutes
Data Port	USB
Operating Conditions	50-104°F (10-40°C)
Memory Capacity	Up to 450 test results