Prodigy Autocode User Manual

Owner’s Manual
AutoCode
®
Blood Glucose Meter
54
Battery Replacement
When replacing the batteries, make sure the meter is
turned off.
STEP 1: With the meter off, press the buckle on the
battery cover and lift up to open the cover.
STEP 2: Remove the old batteries and replace with new
ones. Be sure to align the batteries properly.
STEP 3: Close the battery cover. If the meter does not
power on after you have replaced the batteries, check
that the batteries are correctly installed.
STEP 4: Turn the meter on by pressing the “M” button
to check the time and date. Replacing the batteries does
not affect the meter’s memory (previous test results
stored in the memory). However, the date, time and unit
of measurement settings may need to be updated.
Caution: As with all small objects, the batteries
should be kept away from small children. If the
battery is swallowed, seek medical assistance
immediately.
Remove the batteries if you are not going to use the
device for a long period of time (i.e., 3 months or
more), or the batteries might leak chemicals.

Prodigy Autocode Specifications

General

Measurement Range	20-600 mg/dL
Sample Size	0.6 µL
Test Time	6 seconds
Coding	No Coding Required
Battery Type	2 x AAA batteries
Automatic Shutoff	2 minutes
Data Port	USB
Operating Conditions	50-104°F (10-40°C)
Memory Capacity	Up to 450 test results