Prodigy Autocode User Manual

Owner’s Manual
AutoCode
®
Blood Glucose Meter AutoCode
®
Blood Glucose Meter
47
Each time you press and release the
“M” button, the meter will recall up
to your last 450 test results in order.
When the memory is full, the oldest
test result will be deleted and the
newest will be added. After reaching
the last individual result, press the
“M” button and the meter will turn
off.
STEP 4: Exit the Memory Mode
At any point, you may press and hold the “M” button for
four (4) seconds to exit memory mode.
Voice Speaks: “Please insert the test strip.”
Important: If no buttons are pressed for one (1)
minute, the meter will display “OFF” and turn off
automatically.
Test results in your meter’s memory can be transmitted
to your personal computer. Please visit the Prodigy web-
site, www.prodigymeter.com, for more information.
Viewing Results on a Personal Computer
Figure 38

Prodigy Autocode Specifications

General

Measurement Range	20-600 mg/dL
Sample Size	0.6 µL
Test Time	6 seconds
Coding	No Coding Required
Battery Type	2 x AAA batteries
Automatic Shutoff	2 minutes
Data Port	USB
Operating Conditions	50-104°F (10-40°C)
Memory Capacity	Up to 450 test results