Prodigy Autocode User Manual

Owner’s Manual
AutoCode
®
Blood Glucose Meter
56
“HI” appears when your result is above
the measurement limit, which is higher
than 600 mg/dL (33.3 mmol/L). You
should immediately consult with your
healthcare professional.
Message Description
Error
Message What it Means
What it means: Appears when the
batteries cannot provide enough power
for a test.
Action: Replace the batteries immediately.
What it means: The strip is used or
moistened.
Action: Test with a new test strip. If
the problem persists, please contact
Customer Care at 1.800.243.2636.

Prodigy Autocode Specifications

General

Measurement Range	20-600 mg/dL
Sample Size	0.6 µL
Test Time	6 seconds
Coding	No Coding Required
Battery Type	2 x AAA batteries
Automatic Shutoff	2 minutes
Data Port	USB
Operating Conditions	50-104°F (10-40°C)
Memory Capacity	Up to 450 test results