Owner’s Manual
AutoCode
®
Blood Glucose Meter
58
Probable Cause Actions
Probable Cause Actions
Troubleshooting Guide
vThe meter does not display a message after
inserting a test strip
Battery exhausted. Replace the batteries.
Battery incorrectly
Check that the batteries are
installed or absent.
present and correctly installed.
vThe test does not start after applying the
sample.
Test strip inserted Insert the test strip correctly
upside down or with the contact bar entering
incompletely. the test strip slot.
Defective meter. Please contact Customer Care
at 1.800.243.2636 for assistance.
Insufcient blood Repeat the test using a new
sample.
test strip and a larger blood
sample.
To Next Page
Loading...
