Owner’s Manual
AutoCode
®
Blood Glucose Meter AutoCode
®
Blood Glucose Meter
27
Figure 16
Figure 17
If you want to clear ALL memory,
press the “M” button for four (4)
seconds. See Figure 16.
“OK” will appear to show that all
memory has been deleted.
Setup is now complete. “OFF” will
display and the meter will turn off.
See Figure 17.
STEP 11: Delete Memory
When the “dEL” and ashing “ ” symbols appear on
the display, you can choose to clear the memory. If you
do not want to clear the memory, press the “SET” but-
ton to skip this step.
To Next Page
Loading...
