Owner’s Manual
AutoCode
®
Blood Glucose Meter
38
STEP 3: Gently massage your
nger or the puncture site to ob-
tain the required blood volume. To
perform the test, you need 0.7 μL
of blood. For best results, wipe off
the rst drop of blood and gently
massage the area to obtain anoth-
er drop of blood. Do not smear the
blood sample.
Step 4: Remove the Lancing De-
vice Cover and push the Lancet
Ejector to release the Lancet. Dis-
pose of the used Lancet into the
appropriate Sharps or Biohazard
container.
Note: The rst drop of blood usually contains tissue
uid and serum which may affect the test result. It
should be discarded.
To Next Page
Loading...
