Prodigy Autocode User Manual

Owner’s Manual
AutoCode
®
Blood Glucose Meter AutoCode
®
Blood Glucose Meter
41
• Step 4 - Using overlapping dragging motions in
an upward direction, repeat the motion around the
puncture sight until you hear the meter beep then
say, “testing.”
• Step 5 - Hold the test strip in place until you hear the
meter say your test results.
Tip Four - Practice, Practice, Practice
Practicing is the key to feeling comfortable and condent
in performing any new method, and we suggest using
Prodigy Control Solution when practicing.
Practice until you can easily get a test result that falls
within the target range for the Prodigy Control Solution
three (3) times in a row. It may be helpful to have some
-
one with sight watch you practice so they can provide
feedback or answer questions you may have.

Prodigy Autocode Specifications

General

Measurement Range	20-600 mg/dL
Sample Size	0.6 µL
Test Time	6 seconds
Coding	No Coding Required
Battery Type	2 x AAA batteries
Automatic Shutoff	2 minutes
Data Port	USB
Operating Conditions	50-104°F (10-40°C)
Memory Capacity	Up to 450 test results