14
User Manual | Agrónic 2500
5.1. FERTILIZATION
5 PARAMETERS
To access the menu, press ‘Function’ on the keypad,
select 4. Parameters, ‘Enter’.
FUNCTION
1. PROGRAMS
2. MANUAL
3. READINGS
4. PARAMETERS
5. PIVOTS
It is divided into twelve sections. To enter one of them,
just press the corresponding index number or move to
the selection with the arrow keys and then press ‘Enter’.
PARAMETERS
1. Fertilization
2. Filters
3. General
4. Programs
5. Sectors
6. Communications
7. Determining factors
8. Sensors
9. Various
10. Installer
11. Solar irrigation
12. Pivot
If a menu has more than 5 lines, the ‘↓’ symbol will be
displayed to indicate that they do not fit on the screen, so
press the index number or move the ‘↓’ key to access them.
An example of how to interpret the questions and how
to modify the possible values to configure is explained:
Example
Type of fert. (series | parallel)
YES
FRI
• Indicates that there are several options to
modify.
N. of fertilizers (0 ... 4)
• Underlined value or number: indicates the
default value that is configured in the con-
troller.
Fertilizer general (yes | no)
YES
• Indicates the option to respond with ‘yes’ or
‘no’.
Example of interpretation
N. of fertilizers: 0
Fertilizer general: no
Type of fert.: series
The Agrónic 2500 can work up to four fertilizers.
The Plus version has three types of application: series,
parallel and parallel with uniform distribution.
Series fertilization
(one behind the other)
To install and prepare the unit for operation, enter the ‘Parameters’ section and adapt them to
the needs of each installation.
Parallel fertilization
(all at the same time)
Video tutorial
available for
this section
An example of how to interpret the questions and how
to modify the possible values to configure is explained:
To Next Page
Loading...
Need help?
General
