Progrés Agronic 2500 - 11 PARAMETERS SCREEN

52
User Manual | Agrónic 2500
11 PARAMETERS SCREEN
No. fertilizers: 4
General fertilizer: yes
F1 mixer: no
F2 mixer: yes
F3 mixer: yes
F4 mixer: no
Pre-mixing: 015”
Mixing start: 030”
Mixing stop: 120”
End cleaning: 030”
F1 Meter: 01
F2 Meter: 02
F3 Meter: 03
F4 Meter: 04
Flow rate F1: 000.00 L/h
Flow rate F2: 000.00 L/h
Flow rate F3: 000.00 L/h
Flow rate F4: 000.00 L/h
No. of filters 5
Initial wait: 000”
Activation time
by filter: 045”
Pause between filters: 04”
Units between cleanings
Volume: 01850 m3
Time: 2100 ‘
General filter: no
Relationship with M1: yes
Relationship with M2: no
Maximum No. of
consecutive cleanings: 3
Sector stop: no
Sector: 01
Output No.: 00001
Output No.: 00000
Pump 1: yes
Pump 2: no
Stroke timing:
water hammer: +028”
Meter No.: 05
Expected flow:
015.50 m3/h
Flow detector
Input No.: 00000
Sector area: 000000 m2
Crop: 000000
Coe. corrector: 1.00
Text:
Pump 1: yes
Temp. start: 018”
Temp. stop: 012”
Stop in the sectors: no
Pump 2: yes
Temp. start: 005”
Temp. stop: 022”
Stop in sectors: yes
Assign outputs:
pump 1: 00027
Pump 2: 00026
F1: 00025
F2: 00024
F3: 00023
F4: 00022
Fertilizer:
pump: 00021
Cleaning: 00020
A1: 00000
A2: 00020
A3: 00019
A4: 00000
L1: 00018
L5: 00014
Program No. 12
Start type: [schedule]
[sequential]
[condition.]
Irrigation units:
[ hh:mm ]
[ m3 ]
[ m3/ha]
[ mm’ss’’ ]
Pre-irrigation:
00:00
Post-irrigation:
00:00
Days of the week: yes
Priority: 0
Determining factors:
00 00 00 00 00
Text:
ENTER
ENTER
ENTER ENTER
or
2
or
6
or
5
or
3
or
4
FERTILIZATION PARAMETERS
FILTER PARAMETERS
SECTOR PARAMETERS
GENERAL PARAMETERS PROGRAM PARAMETERS
FUN
ENTER
1
Determining factor: 01
Type: start
Origin: analog sensor
Analog sensor No.: 01
Detection delay: 0010”
Reference: + 00.0ºC
When surpassed: no
Is this an anomaly: no
In error: do not change
SMS to tel. A: no
SMS to tel. B: no
SMS text c: 0
Urgent sending: no
Text:
DET. FACTOR PARAMETERS
ENTER
or
7
“See specific communica-
tions manual”