EasyManuals Logo

Progrés Agronic 2500 User Manual

Progrés Agronic 2500
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
5
User Manual | Agrónic 2500
Control up to 30 sectors using 50 irrigation programs.
Each program can activate 1 to 4 irrigation sectors si-
multaneously.
There are three ways to start a program:
Schedule start: at a specific time choosing the days
of the week or repeat the irrigation every few days
(frequency of days).
Days of the week Every 3 days
Sequential start: when another program has finished.
It is used to irrigate several sector groups one aer
another. The first program in the sequence must be
schedule start or conditional.
P6 sequential of P5 and P7 sequential of P6, etc.
Conditional start: when a determining factor is
activated.
The determining factor is related to any type of sensor
and can activate the program, for example, when
the temperature rises, when a buoy is deactivated
or when a flow rate drops below a certain level. An
active schedule and a safe schedule can be configured
between starts.
Conditional start due to frost
Once the program has started, there is an option to
repeat the irrigation every certain amount of time.
At the start, the amount of irrigation can be modified
using the determining factors. For example, increase
irrigation by % if there is a lot of radiation, decrease ir-
rigation by % if there is a lot of moisture in the soil, etc.
Irrigation units can be in time, hh:mm, mm:ss or
hh:mm/ha; or in volume, m3 or m3/ha (m3 per hectare).
A record is made of the irrigation time and volume for
each sector and in total.
When the program is active, irrigation can be stopped,
permanently or temporarily, using a determining
factor. For example, stopping when it is very windy,
stopping while the well level is low, stopping when the
flow in a sector is too high (broken pipe), etc.
2 FEATURES
The Agrónic 2500 is a controller for controlling irrigation, fertilization, pumping and filter cleaning.
It detects malfunctions and creates a chronological record of the events. Fully configurable, with
multiple possibilities for use, communication and expansion.
IRRIGATION

Other manuals for Progrés Agronic 2500

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Progrés Agronic 2500 and is the answer not in the manual?

Progrés Agronic 2500 Specifications

General IconGeneral
BrandProgrés
ModelAgronic 2500
CategoryFarm Equipment
LanguageEnglish