Progrés Agronic 2500 User Manual

6
User Manual | Agrónic 2500
Description of basic functions
PUMPING
It has 2 general irrigation outputs, or pumps.
One of the pumps can be a motor pump or generator
set. Each sector is assigned with the pumps associated
to it.
The pumps are activated together with the sector.
There are time delays to separate the pump from the
sector activation, during activation as well as stop, to
avoid water hammer.
Configurable from 0 to 4 fertilizers in separate tanks.
Separates pre- and post-irrigation values in each
program.
Fertilization units in time (hh:mm or mm:ss) or in
volume (L or L/ha).
Configured to use mixers, with pre-mixing and inter-
mittent or continuous mixing.
Fertilizers can be applied in three dierent ways:
in series: one type of fertilizer aer another from a
single injector
Series fertilization
IRRIGATION
FERTILIZER 1
20 L
30 L
12 L
FERTILIZER 2
FERTILIZER 3
Parallel: various fertilizers simultaneously with one
injector per type.
Parallel fertilization
FERTILIZER 1
IRRIGATION
FERTILIZER 2
FERTILIZER 3
20 L
30 L
12 L
Uniform: applies and distributes the each type of fertil-
izer uniformly between pre- and post-irrigation.
Uniform fertilization
IRRIGATION
FERTILIZER 1
20 L
30 L
12 L
FERTILIZER 2
FERTILIZER 3
In volume fertilization, detect no pulses or leak. The
proportional distribution of each pulse made by the
meter is recorded into the totals and history according
to the planned flows in sectors being fertilized at the
same time. Parallel fertilization.
FERTILIZATION

Progrés Agronic 2500 Specifications

General

Brand	Progrés
Model	Agronic 2500
Category	Farm Equipment
Language	English