23
Parameters | Programs
User Manual | Agrónic 2500
Priority (0 ... 9): when a program starts and another is
irrigating, the one with the highest priority irrigates
and the other is postponed. If they share sectors it
will not be postponed. If there is no assigned priority,
there may be several active programs at the same
time as long as they do not share sectors or fertilizers.
At 0 there is no priority, at 1 maximum priority, at 9
minimum priority.
Determining factors (00 ... 30): up to five determining
factors that aect the program can be configured.
Leaving 0 there is no determining factor. Use the
determining factors to start and stop the program,
modify irrigation and fertilizer, stop due to alarms, etc.
Programs with sequential start cannot have start de-
termining factors.
Safety time between starts (00:00 ... 23:59): when the
program starts due to a determining factor, it cannot
be started again until the time configured here passes.
It is a safety to avoid continuous irrigation if the sensor
malfunctions. At 0 there is no control. It only asks if the
program starts by determining factor.
Text (0 ... 9 characters): program identification text.
To Next Page
Loading...
Need help?
General
