27
Parameters | Determining factors
User Manual | Agrónic 2500
Definitive stop
✅ ✅ ✅ ✅ ✅
Temporary stop
✅ ✅ ✅ ✅ ✅
Conditional stop
✅ ✅ ✅ ✅
Start
✅ ✅ ✅
Start / Stop
✅ ✅ ✅
Warning
✅ ✅ ✅ ✅
Modify irrigation
✅ ✅ ✅
Modify fertilizer
✅ ✅ ✅
End due to rain
✅
Filter pressure gage
✅ ✅
Diesel pressure gage
✅
Stop fertilizer
✅ ✅ ✅ ✅
Type
Digital sensor
origin
Analog sensor
origin
Meter sensor
origin
Flow error origin
Origin
Communication
Relation between types of determining factors and the origin that can be used:
Common parameters for all
DETERMINING FACTOR PARAMETERS
Determining factor 18
SMS to tel. A: yes
SMS to tel. B: yes
SMS text C: 0
It is an anomaly: yes
To all programs: no
In error: does not change
Text: abcdefghi
SMS to tel. A (Yes ... No): when the determining factor is
activated, send an SMS to phone A.
SMS to tel. B (Yes ... No): when the determining factor is
activated, send an SMS to phone B.
SMS to tel. C (0 ... 6): when the determining factor is
activated, send an SMS to phone C with the selected.
Urgent send (Yes ... No): only used if the GPRS modem is
deactivated on a schedule.
• Yes: if the modem is deactivated, it is activated to
send the SMS and deactivated again.
• No: if the modem is deactivated, the SMS will be
sent when it is activated by schedule.
It is an anomaly (Yes ... No): yes when the determining
factor is activated, it is registered as a new anomaly.
In all programs (Yes ... No):
• Yes: the determining factor is associated with all
Agrónic programs. It is not assigned to foggers.
• No: the determining factor is associated with the
desired programs within ‘Function - 4. Parameters
- 5. Programs’.
In error (No change | Not active | Active): what to do if
there is an error in the sensor associated with the de-
termining factor.
• No change: the determining factor maintains the
state.
• Not active: the determining factor is deactivated.
• Active: the determining factor is activated.
Text (0 ... 9 characters): identifying text of the determin-
ing factor.