8
User Manual | Agrónic 2500
Description of basic functions
PIVOT CONTROL
Remote management of up to 4 circular and linear
pivots. Its features are:
• position reading by GPS.
• Speed and direction control.
• Deactivation of the jet and the wing according to
position.
• Control of diesel pumps or solar irrigation.
• Control of physical guards in sector pivots.
• Manual action such as start, stop, dry passes, etc.
• Sectorization and configuration of up to 8 irrigable
areas by pivot.
• Programming by time or by passes.
• Modify precipitation rate by area.
• Information on alarms, misalignment, slip and
pivot position.
Modify irrigation depending on the sensors (climate,
plant, soil).
Remote management through Agrónic APP, VEGGA
and Agrónic PC.
SOLAR IRRIGATION
Uses solar power to irrigate. It drives pumps using
solar panels connected to a solar radiation sensor and
a frequency drive.
It combines solar power and power from the electrical
grid or diesel pump in hybrid installations to ensure
irrigation on cloudy days or outside of sunlight hours.
Solar irrigation also allows irrigation at dierent
pressures, prioritizing sectors with higher pressure.
MANUAL
Through manual commands, the unit can:
• start, stop or place a program out of service
• Suspend a program for a few hours
• Leave the unit out of service or on general stop
• Start or stop filter cleaning
• Modify the time and date on the unit
• Terminate alarms and malfunctions
• Set the sectors to manual, stop or automatic
• Modify virtual sensors
• Activate outputs
• Erase totals
• Place the determining factors out of service
To Next Page
Loading...
Need help?
General
