Beta Draft Confidential
Thermostat Management Interface (TMI)
Professional Series Network Thermostat Configuration Guide, Release 3.0 3-5
Part No. 600-01000-200, Rev. 2
Thermostat Management Interface (TMI)
The Proliphix Thermostat Management Interface (TMI) provides network
management capability to control your Professional Series thermostats. This section
describes the browser-based configuration using the TMI. Review the instructions in
this section prior to configuring your thermostat.
HTML Interface
To access the initial HTML page of the thermostat, enter the unique IP address
initially assigned via DHCP (see page 3-2) and the Web HTTP port number in your
browser window. For example:
http://192.168.111.100:80
Where 192.168.111.100 is a unique IP address initially assigned via DHCP and 80 is
the default (Proliphix assigned) Web HTTP port number. (If you are upgrading your
device from a previous version of Proliphix firmware, this port number may be
something other than 80. The old port number is carried forward after the firmware
upgrade.) After you enter these two fields into the browser, the system displays the
first TMI page.
Tip
Proliphix recommends that these parameters be fixed “statically” so that this
address can be bookmarked in your browser. Proliphix recommends that you
choose a unique static IP address assigned from outside the DHCP server pool of
addresses. See the Network Settings Page (page 3-30) for more information on
static IP address assignment.
To Next Page
