Proliphix Professional NT100e/h - Sensor Settings Page; Figure 3-16 Sensor Settings Page

Beta Draft Confidential
3-46 Professional Series Network Thermostat Configuration Guide, Release 3.0
Part No. 600-01000-200, Rev. 2
CHAPTER 3: Configuring the Thermostat Using the TMI
Sensor Settings Page
From the Sensor Settings page, you can add external thermal sensors and configure
zone temperature thermal averaging of the Local or the two Remote Sensors.
Figure 3-16 Sensor Settings Page
Note
This page is not available on the NT100e/h Network Thermostat because the
NT100e/h does not support external thermal sensors.