protech PA-6225 - Page 102

Chapter 3 Software
PA-6225 SERIES USER MANUAL
Page 95
ESC c 5 n
[Name]
Enable/disable panel buttons
[Format]
ASCII ESC c 5 n
Hex. 1B 63 35 n
Decimal 27 99 53 n
[Range]
Specification: 0 ≤ n ≤ 255
Initial Value n = 0
[Description]
Toggles the panel switches between enabled and disabled.
 Enables panel switches when n = <*******0>B.
 Disables panel switches when n = <*******1>B.
 n is effective only when it is the lowest bit.
 When disabled, all panel switches are disabled.
ESC d n
[Name]
Print and feed n lines
[Format]
ASCII ESC d n
Hex. 1B 64 n
Decimal 27 100 n
[Range]
0 ≤ n ≤ 255
[Description]
Prints the data in the print buffer and performs a paper feed of n lines.
 Sets the print position to the beginning of the next line after printing.
 Paper is fed approximately 150 mm if the [n x basic calculated pitch]
exceeds approximately 150 mm (5.9 inches).