protech PA-6225 - Page 103

Chapter 3 Software
PA-6225 SERIES USER MANUAL
Page 96
ESC i
[Name]
Full cut.
[Format]
ASCII ESC i
Hex. 1B 69
Decimal 27 105
[Range]
N/A
[Description]
This command executes a full cut of the paper in standard mode
ESC m
[Name]
Partial cut.
[Format]
ASCII ESC m
Hex. 1B 6D
Decimal 27 109
[Range]
N/A
[Description]
This command executes a partial cut of the paper with one point uncut in
standard mode.
ESC p m t1 t2
[Name]
General pulse.
[Format]
ASCII ESC p m t1 t2
Hex. 1B 70 m t1 t2
Decimal 27 112 m t1 t2
[Range]
0 ≤ m ≤ 1, 48 ≤ m ≤ 49
0 ≤ t1 ≤ 255
0 ≤ t2 ≤ 255
[Description]
This outputs a signal specified by t1 and t2 to the connector pin specified by
m. Drawer kick on time is set to t1 x 2 ms; off time is set to t2 x 2 ms.
m
Connector Pin
0, 48
Drawer kick connector pin #2
1, 49
Drawer kick connector pin #5
t1
t2