protech PA-6225 - Page 104

Chapter 3 Software
PA-6225 SERIES USER MANUAL
Page 97
ESC t n
[Name]
Select character code table.
[Format]
ASCII ESC t n
Hex. 1B 74 n
Decimal 27 116 n
[Range]
0 ≤ n ≤ 8
Initial Value n = 0
[Description]
Select page n of the character code table.
n
Character set
0
CP-437
1
Katakana
2
CP-850
3
CP-852
4
CP-860
5
CP-863
6
CP-865
7
CP-1252
8
User Define
ESC { n
[Name]
Turns upside-down printing mode on/off.
[Format]
ASCII ESC { n
Hex. 1B 7B n
Decimal 27 123 n
[Range]
0 ≤ n ≤ 255
Initial Value n = 0
[Description]
Specifies or cancels upside-down printing.
 Cancels upside-down printing when n = <*******0>H.
 Specifies upside-down printing when n = <*******1>H.
 n is effective only when it is the lowest bit.
 This command is effective only when input at the top of the line when
standard mode is being used.
 This command has no effect in page mode. In page mode, this command
is only effective for the setting.
 Upside-down printing rotates line data 180 degrees.