protech PA-6225 - Page 113

Chapter 3 Software
PA-6225 SERIES USER MANUAL
Page 106
GS L nL nH
[Name]
Set left margin.
[Format]
ASCII GS L nL nH
Hex. 1D 4C nL nH
Decimal 29 76 nL nH
[Range]
0 ≤ nL ≤ 255, 0 ≤ nH ≤ 255
Initial Value (nL + nH x 256)=0 (nL=0, nH=0)
[Description]
nL and nH set the specified left margin.
The left margin is [(nL + nH x 256) x basic calculated pitch].
GS P x y
[Name]
Set basic calculated pitch.
[Format]
ASCII GS P x y
Hex. 1D 50 x y
Decimal 29 80 x y
[Range]
0 ≤ x ≤ 255
0 ≤ y ≤ 255
Initial Value x = 203, y = 203: EPSON targeted model print head 203 DPI
[Description]
Sets the horizontal basic calculated pitch to approximately 25.4/xmm [(1/x)
inch], and the vertical basic calculated pitch to approximately 25.4/ymm
[(1/y) inch].
x = 0: Returns the horizontal basic calculated pitch to its default value.
y = 0: Returns the vertical basic calculated pitch to its default value.
GS V m
[Name]
Cut paper.
[Format]
ASCII GS V m ( n )
Hex. 1D 56 m ( n )
Decimal 29 86 m ( n )
[Range]
m = 0,1,48,49,65,66 0 ≤ n ≤ 255