protech PA-6225 - Page 176

Chapter 3 Software
PA-6225 SERIES USER MANUAL
Page 169
3-4-4-5. IDE Configuration
This menu provides advanced IDE configuration for hard drive.
IDE Configuration Screen
BIOS Setting
Options
Description/Purpose
Serial-ATA
(SATA)
- Disabled
- Enabled
Enables or disables SATA Device.
SATA Test
Mode
- Disabled
- Enabled
Enables or disables SATA Test Mode.
SATA Speed
Support
- GEN1
- GEN2
• Gen1 mode sets the device to 1.5 Gbit/s
speed.
• Gen2 mode sets the device to 3 Gbit/s speed
(in case it is compatible).
SATA Mode
- IDE mode
- AHCI mode
Configures SATA as following:
• IDE: Set SATA operation mode to IDE
mode.