PA-6225 SERIES USER MANUAL
• AHCI: SATA works as AHCI (Advanced
Host Controller Interface) mode for
achieving better performance.
Enables or disables SATA port 0 Device.
Enables or disables SATA port 0 Device
HotPlug.
Displays the drive installed on this SATA port
0. Shows [Empty] if no drive is installed.
If the mother board supports RAID, it will
show ASMT109x- Conf (0.1GB)
Note*1: If the board support RAID function, the switch controls RAID SATA Port
(SATA1 and SATA2) on board.
To Next Page
Loading...