[4] When the title name is completed press the key
Example: To enter CATV 9501 as a title name use the following procedure:
ENTER
A) Press and release the key. Until the character cursor is in the first character position.
F1
B) Select with the Keys or the rotary dial knob.
C
a) Press the key to advance the cursor to the next character position
F1
b) Select the with the key or rotary dial
A
c) Press the key
F1
d) Select the remaining letters , using the same procedure as a above
T V
e) Press the key to enter a space
CLR/.
f) Press the , , , numeric keys
9 5 0 1
g) Press the key
ENTER
[5] A title name may be changed or edited by pressing the key and using the same
procedure as in sect. 6-1
F1
a) Select the title name to be changed or edited with the keys or rotary dial.
b) Press the key to highlight the character in the title name to be changed
F1
c) Press the key to select the new character
d) Press to advance the cursor to the next character ⑥ to be changed.
F1
e) Press the key then the key when finished
ENTER F4
36
36
To Next Page
Loading...
Need help?
General
