Installation and setup
Page C-18 Operator’s Manual PiCCO
2
Version 3.1
The units g/dl or mmol/l can be used for Hb. Alternatively input of Hct is possible (adjustment in measurement
configuration, chapter C5.6). During blood gas analysis, all other monitor functions can be operated.
When returning to the ScvO
2
screen, the lab values for the respective measurement can be entered. In cases
where the lab results are invalid, press "Reject" button and withdraw a new blood sample.
3.6.2 SaO
2
Input
Input of arterial oxygen saturation is required for display of parameters DO
2
and VO
2
(oxygen delivery and
oxygen consumption).
SaO
2
input can be done independently from ScvO
2
calibration.
To Next Page
Loading...