Appendix
Page E-6 Operator’s Manual PiCCO
2
Version 3.1
3 Interfaces
AP / CVP
Transfer of continuous arterial pressure (AP) and central venous pressure (CVP) signal to bedside monitor.
LAN
Connection for network devices for printing and data transfer.
Serial Interface RS232
Connection for patient data management systems (PDMS)
Please contact your PULSION representative for current technical information.
USB ports (2)
Connection for external printer and PULSION memory stick.
The interfaces are galvanically isolated by an isolation voltage of 1.5kV (IEC 60601-1).
CAUTION: Furthermore, all configurations have to meet the system standard IEC 60601-1-1.
Any person who connects additional devices to the signal input or signal output of the PiCCO
2
is
changing the system configuration and is responsible for observing the requirements of the
IEC 60601-1-1 Standard.
IMPORTANT: For safety of operation, only memory sticks and printers approved by
PULSION Medical Systems may be used with the PiCCO
2
.
To Next Page
Loading...