Disposables / Accessories
Operator´s Manual PiCCO
2
Page
Version 3.1 D-3
1.4 CeVOX probe
The PULSION CeVOX fiberoptic probes have been specifically developed for use with the PULSION optical
module. The probes are equipped with fiberoptics to transfer light at a specific wavelength. For continuous
oxygen saturation monitoring the probe is inserted into the distal lumen of an already placed central venous
catheter. Dependent on the type of the central venous catheter an appropriate probe has to be selected.
PV2022-30 2F CeVOX probe (usable length: 30 cm)
PV2022-32 2F CeVOX probe (usable length: 32 cm)
PV2022-33 2F CeVOX probe (usable length: 33 cm)
PV2022-35 2F CeVOX probe (usable length: 35 cm)
PV2022-37 2F CeVOX probe (usable length: 37 cm)
PV2022-38 2F CeVOX probe (usable length: 38 cm)
PV2022-48 2F CeVOX probe (usable length: 48 cm)
Other lengths can be ordered with a delivery time of 6 weeks (packaging unit=50).
The CeVOX probes are designed for 15 cm, 20 cm and 30 cm central venous catheters with a distal lumen of
ø ≥ 0.032´´ guide wires (0.8 mm). The tip of the probe has to exceed the distal tip of the central venous
catheter by 2.5 ± 0.5 cm.
WARNING: Incorrect use of the ScvO
2
probe can lead to vessel perforation. Therefore check the
correct position of the probe as indicated in the probe´s instructions for use.
To Next Page
Loading...