PULSION PiCCO2 - Parameter Settings

Installation and setup
Operator´s Manual PiCCO
2
Page
Version 3.1 C-37
5.3.3 Parameter settings
Absolute / Indexed
Depending on the setting of the entire device the PiCCO
2
shows the parameters as either absolute or indexed
to the body characteristics of the patient. Exceptions are the patient profiles, SpiderVision and the trend
display because the indication of normal value ranges is only reasonable for indexed parameters.
Display of units Yes / No
The respective parameter units can be activated or deactivated with this option.
Parameter selection Basic / Cardiac / Septic / Individual
The main parameters are shown in the basic display. In the case of individual parameter settings "Individual"
is displayed.
L New in version 3.1:
Two additional settings “Cardiac” and “Septic” are available by default, containing the following parameters:
Cardiac
Septic
PCCI, SVI, CI
PCCI, SVI, CI
GEDI
GEDI, SVV
SVRI
SVRI
GEF, dPmx
---
ELWI, CPI, TB
ELWI, PVPI, CPI, TB
ScvO2, DO2, VO2
ScvO2, DO2, VO2
 Please contact your PULSION representative to individually modify the parameter profiles.