Pyronix STERLING 10 Installation Manual

Sterling 10 Installation Manual
Page 34 RINS1413-1
6.13.3 Arm Mode C Exit Options (Function 34)
Press 
This starts the function
ENTER SEQUENCE
Enter the required Exit Option  to
.
NOTE: Default is 0 (Timed Exit).
0 = Timed Exit
1 = Push To Arm
2 = Final Door
ENTER SEQUENCE
0
The configuration will save automatically.
You will be returned to engineer mode.
6.13.4 Arm Mode D Exit Options (Function 35)
Press 
This starts the function
ENTER SEQUENCE
Enter the required Exit Option  to
.
NOTE: Default is 0 (Timed Exit).
0 = Timed Exit
1 = Push To Arm
2 = Final Door
ENTER SEQUENCE
0
The configuration will save automatically.
You will be returned to engineer mode.
6.14 Final Door Arm Delay (Function 36)
Press 
This starts the function
ENTER SEQUENCE
Enter the time in seconds  to .
NOTE: Default is 7 seconds.
ENTER SEQUENCE
0
Press 
You will be returned to engineer mode.
6.15 Send Names
Press  and use the  key to scroll
to
FUNCTIONS
. Press .
VERSION NO.
Use the  key to scroll to
SEND
NAMES
.
SEND NAMES
Press  to send the data in that
keypad to other keypads.
SEND NAMES
You will be returned to engineer mode.

Pyronix STERLING 10 Specifications

General

Brand	Pyronix
Model	STERLING 10
Category	Control Panel
Language	English