Sterling 10 Installation Manual
Page 36 RINS1413-1
6.18 Change Text
Press and use the key to scroll
to
CHANGE TEXT
. Press .
CHANGE TEXT
Use the key to scroll to the user,
zone or label you wish to edit.
Use the and keys to move the
flashing cursor over the character to be
changed.
Use the numeric keys (0-9) to change
the character displayed at the cursor
position.
Repeat for all characters as required.
Example shows text label for User 1.
CHANGE TEXT
USER 1
CHANGE TEXT
JOHN SMITH
Press to save the edited text.
CHANGE TEXT
JOHN SMITH
Repeat for all the text labels you wish to
edit. To exit the function, use the
key to scroll to
EXIT
. Press .
You will be returned to engineer mode.
The default text strings are as follows:
Situation Label
System Disarmed
SYSTEM DISARMED
System Armed
SYSTEM ARMED
First To Alarm Mode
(After alarm, when code entered)
SYSTEM ARMED
ALARM LOUNGE
System Faults
!SYSTEM DISARMED
Zone Label User Label
1
F DOOR
1 (Master User)
USER 1
2
HALL
2 (Limited User)
USER 2
3
LOUNGE
3 (Limited User)
USER 3
4
DINING
4 (Limited User)
USER 4
5
KITCHEN
5 (Limited User)
USER 5
6
B DOOR
6 (Limited User)
USER 6
7
CONSERV
7 (Limited User)
USER 7
8
LANDING
8 (Limited User)
USER 8
To Next Page
Loading...
Need help?
General
