Sterling 10 Installation Manual
RINS1413-1 Page 35
6.16 System Test
Press and use the key to scroll
to
SYSTEM TEST
. Press . The
display test starts.
SYSTEM TEST
DISPLAY TEST
To proceed to the strobe test, press any
key. The strobe will flash.
SYSTEM TEST
STROBE TEST
To proceed to the bell test, press any
key. The bell will sound.
SYSTEM TEST
BELL TEST
To proceed to the sounders test, press
any key. The internal sounders will
sound.
SYSTEM TEST
SOUNDERS TEST
To end the tests press any key.
You will be returned to engineer mode.
6.17 Self Test
Press and use the key to scroll
to
FUNCTIONS
. Press .
VERSION NO.
Use the key to scroll to
SELF
TEST
.
SELF TES
Press to start the self test.
PLEASE WAIT
The display will start scrolling. Press .
When the display reads
PRESS ALL
KEYS
, press each key in turn.
PRESS ALL KEYS
The Fire tones will start. Press any key to
stop the tones and exit the test. If any of
the keys are not working, press and hold
a working key to exit the test.
You will be returned to engineer mode.
To Next Page
Loading...
Need help?
General
